EUROPEAN NETWORK FOR THE NUMERICAL SIMULATION OF SPACE PLASMAS

The Cluster mission of the European Space Agency (ESA) will allow, for the first time three-dimensional measurements in key regions of the Earth's magnetosphere to be carried out. The European Numerical Simulation Network (ENSN) aims at providing a theoretical support to the mission. We describe the achievements of the ENSN during its first period of activity 1991–1994, during which the network was funded by the European Union. In particular, the ENSN has set up (i) thematic Working Groups on the prime scientific goals of the mission, (ii) a code development Working Group to develop numerical simulation codes specifically adapted to studying magnetospheric boundaries and the corresponding scale mixing, and (iii) software models of Cluster instruments to test in a numerical simulation what the set of four instruments will measure.     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Large lithium ion batteries for aerospace and aircraft applications

Eagle-Picher Energy Products (EPEP) has been manufacturing and testing large lithium ion cells (up to 100-Ah) for several years. Recently, work has focused on the testing of different chemistries at variable temperatures and designing and fabricating 100-Ah cylindrical cells. For the aircraft application the largest concern is irreversible capacity loss at elevated temperatures (70°C). In contrast, for the aerospace application shelf-life and cycle life are critical. EPEP has found that the major contributor to the loss in low temperature performance due to high temperature testing, was the positive electrode. EPEP discuss recent results of variable temperature cycling and 100-Ah cell performance     

Senrad: an advanced wideband air-surveillance radar

The generic characteristics and performance of an experimental long-range air-surveillance radar, known at the Naval Research Laboratory as Senrad, is described. Its distinguishing feature is that it can operate with simultaneous transmissions over a very wide bandwidth-from 850 to 1400 MHz. The technology and type of experimental radar equipment employed are discussed and examples are given of its performance capabilities obtained by means of very wideband operation. The unusually wide bandwidth of this radar allows 1) improved detection and tracking performance because of the absence of the nulls that are common in the antenna elevation radiation-pattern of a single-frequency radar; 2) moving target indication (MTI) without loss of targets due to blind speeds and without the need for multiple PRFs (pulse repetition frequencies); 3) accurate height finding with a fan-beam radar by taking advantage of the multipath time difference as a function of target height; 4) a form of limited target recognition based on high range-resolution; and 5) a reduction of the effectiveness of electronic countermeasures that can seriously degrade more narrowband radars     

Broadening of Fe X (6374 Å) profiles above the limb in a coronal hole

Profiles of the visible Fe X (6374 Å) coronal emission line as a function of height above the limb were obtained out to 1.16 solar radii in a coronal hole using the NSO/Sacramento Peak Observatory Coronagraph, Universal Spectrograph and a CCD camera. These are the first coronal line profiles obtained as a function of height in a coronal hole from the ground. Analysis of the line widths suggests a large component of nonthermal broadening which increases with height ranging from 40 to 60 km/s, depending upon the assumed temperature or thermal component of the profile.     

A SAR processor based on two-dimensional FFT codes

A synthetic aperture radar (SAR) processor approach based on two-dimensional fast Fourier transform (FFT) codes coupled with an asymptotic evaluation of the unit response function is presented. For the latter, no approximation is made to the distance function, so that the full range of geometric aberrations is analytically considered, enabling an effective reference filter to be designed. The two-dimensional FFTs were designed as to run on computers of very limited memory: the required FFT is computed by means of FFTs of lower order. Two FFT codes were considered: one is faster and allows full or reduced (quick look or multilook) resolution performance to be obtained easily; the second is slower but allows the use of a space-varying filter and/or investigations on limited portions (zoom) of the image. Both codes are suited to parallel processing, e.g. by a transputer net. A full discussion on computer memory and time requirements is presented as well as first examples of image processing results     

Century scale solar variability imprinted in the 44Ti activity in meteorites.

The measurements of gamma-activity of the 44Ti (T1/2 = 66.6 years) produced by spallation reaction of galactic cosmic rays (GCR) in Alfianello, Olivenza, Rio Negro, Dhajala and Torino meteorites, which fell in the time interval 1883 AD (Alfianello)-1988 AD (Torino), show a century scale modulation, connected to long-term solar-wind flux variations in the interplanetary space. The variation of the 44Ti activity with the time of fall of meteorites is qualitatively consistent with the Gleissberg solar cycle, but the amplitude is three-four times higher than expected (about 5%) for GCR flux modulated by solar activity, as determined solely by the sunspot number. The cosmogenic 44Ti is a suitable radioisotope for this investigation, but its activity in meteorites is very low. We performed these measurements in the underground low level counting station of Monte dei Cappuccini in Torino, by means of a big hyperpure Ge crystal (approximately 2 kg) in selective coincidence with a heavy NaI (T1) scintillation detector (approximately 28 kg). This system allows a reliable and non destructive measurement of 44Ti (44Sc) in meteorites of 200-1200 g in weight. The background is about 1 count per day in the gamma-peak at 1157 keV of 44Sc in equilibrium with its parent 44Ti. The high stability of the performance allows long-lasting runs (approximately 10(7) s) in order to attain results with a standard deviation up to about 10%.     

Nanotechnology-based molecular test equipment (MTE)

This paper describes original research efforts in the design, simulation, and development of nanotechnology-based molecular test equipment (MTE). This is a research effort for testing printed circuit boards independent of traditional automatic test equipment (ATE) through the fabrication of MTE within integrated circuits (ICs). The MTE is embedded within the IC substrate and encapsulated within nanoprobes that connect between the surface and the substrate of the IC at various functional areas. A process is followed whereby IC device simulation is performed to assess the electrical, chemical, and structural properties of integrated and adjacent substrate devices. Through this approach the nominal and failed device performance parameters of interest to substrate-based MTE are found. Discussion of the development and application of MTE within IC architectures is provided, including such topics as the effect of substrate composition on the design and realization of MTE, interfaces between MTE and IC devices, and reporting of MTE results to the IC surface and technician. Potential application areas within different device functions will also be identified. A chemical structure diagram is also provided to illustrate the implementation of MTE using discrete device configurations with MTE-augmented logic     

Molecular alterations in tumorigenic human bronchial and breast epithelial cells induced by high LET radiation.

Carcinogenesis is a multi-stage process with sequence of genetic events governing the phenotypic expression of a series of transformation steps leading to the development of metastatic cancer. In the present study, immortalized human bronchial (BEP2D) and breast (MCF-10F) cells were irradiated with graded doses of either 150 keV/micrometer alpha particles or 1 GeV/nucleon 56Fe ions. Transformed cells developed through a series of successive steps before becoming tumorigenic in nude mice. Cell fusion studies indicated that radiation-induced tumorigenic phenotype in BEP2D cells could be completely suppressed by fusion with non-tumorigenic BEP2D cells. The differential expressions of known genes between tumorigenic bronchial and breast cells induced by alpha particles and their respective control cultures were compared using cDNA expression array. Among the 11 genes identified to be differentially expressed in BEP2D cells, three (DCC, DNA-PK and p21(CIP1)) were shown to be consistently down-regulated by 2 to 4 fold in all the 5 tumor cell lines examined. In contrast, their expressions in the fusion cell lines were comparable to control BEP2D cells. Similarly, expression levels of a series of genes were found to be altered in a step-wise manner among tumorigenic MCF-10F cells. The results are highly suggestive that functional alterations of these genes may be causally related to the carcinogenic process.     

Design of the TRIO system-on-chip for aerospace

Several design and testing aspects of the TRIO smart sensor data acquisition chip, developed by JHU/APL for NASA spacecraft applications are presented. TRIO includes a 10 bit self-corrected analog-to-digital converter (ADC), 16/32 analog inputs, a front end multiplexer with selectable aquisition time, a current source, memory, serial and parallel bus, and control logic. So far TRIO is used in many missions including Contour, Messenger, Stereo, Pluto, and the generic JPL X2000 spacecraft bus.